Where am I? > Home > News > Technology

Laser accelerated protons to the highest energies so far

Science Centric | 2 November 2009 16:50 GMT
Printable version A clip for your blog or website E-mail the story to a friend
Bookmark or share the story on your social network Vote for this article Leave a comment Decrease text size Increase text size
DON'T MISS —
Digital version of the oldest Bible available
Digital version of the oldest Bible available — [6 Jul 2009] — The surviving pages of the world's oldest biblical manuscript have been reunited digitally in a single book. Today, the famous...
New 'electronic glue' promises cheaper semiconductors
New 'electronic glue' promises cheaper semiconductors — [11 Jun 2009] — Researchers at the University of Chicago and Lawrence Berkeley National Laboratory have developed an 'electronic glue' that...
Marcus Nanotechnology Building at Georgia Tech formally dedicated
Marcus Nanotechnology Building at Georgia Tech formally dedicated — [24 Apr 2009] — Three years after breaking ground, Georgia Tech is set to dedicate the Marcus Nanotechnology Building, one of the most ambitious...
Scientists get a grip on colliding fermions to enhance atomic clock accuracy
Scientists get a grip on colliding fermions to enhance atomic clock accuracy — [16 Apr 2009] — Physicists have measured and controlled seemingly forbidden collisions between neutral strontium atoms - a class of antisocial...
More Technology...

Laser-particle acceleration is an emerging area of physics that is expected to further significant future advances in modern cancer radiotherapy. An international team of physicists, which also includes scientists from the Forschungszentrum Dresden-Rossendorf (FZD), has succeeded in accelerating protons to energies never before achieved with laser-particle acceleration. Radiation in this energy range is for example needed to treat eye cancer.

Intense laser light interactions with matter are able to accelerate particles to high energies that otherwise can only be achieved using large accelerator facilities. Worldwide, physicists are researching the principle of laser particle acceleration and radiation, for future use in cancer treatment for example. Prof. Thomas Cowan, director of the Institute of Radiation Physics at the Forschungszentrum Dresden-Rossendorf (FZD), is one of the first scientists who conducted studies on laser acceleration of protons. The current world record measurements are the result of experiments by Sandrine Gaillard as part of her doctoral thesis, which is supervised by Prof. Cowan. These were obtained in partnership with scientists at the FZD, the Sandia National Laboratories, the University of Nevada, Reno, and the University of Missouri, Columbia, all at the Los Alamos National Laboratory in New Mexico, USA. Protons of energies in excess of 67.5 mega-electron volt (MeV) were accelerated. 1 electron volt is the kinetic energy which is obtained by a particle when it is accelerated by a voltage of 1 volt.

The new record in laser-particle acceleration is due to specially shaped targets. The scientists bombarded thin films with ultrashort laser pulses of 600 femtoseconds (1 femtosecond = 1 billionth of a second) and 80 joules, from which cone-shaped structures protrude, and whose tip is covered with a thin film flat-top. The surfaces were created using nanotechnology, and produced by the company Nanolabz. When the intense laser light impinges the inside of these anvil-like microstructures, electrons are liberated from the material. In contrast to smooth surfaces, the microstructures act as an electron trap. The electric field thus generated may be used to accelerate the protons to higher energies than ever before. Cu K-alpha X-ray imaging was used as a diagnostic to help illustrate and clarify the laser-cone interaction. The scientists still have to resolve the precise interactions; however, computer simulations carried out by Thomas Kluge, PhD student at the FZD, already allow a good description of the new data, thus enabling deeper theoretical insights into the processes. Next, the researchers will measure the intensity of the proton beam - in addition to the energy this is essential for medical applications.

The record measurements are presented at the 51st Annual Meeting of the Division of Plasma Physics of the American Physical Society, which takes place from 2-6 November 2009 in Atlanta/Georgia, USA.

Source: Forschungszentrum Dresden-Rossendorf

Education professor Michael A. Peters says universities need to embrace new online media, social networks and a culture of 'openness' as part of their pedagogy, or they risk becoming seen as anachronisms in today's hyper-connected world, (c) L. Brian StaufferIvory tower needs to adapt to online media landscape, scholar says

— 11 April 2009

Universities need to embrace new online media, social networks and a culture of 'openness' as part of their pedagogy, or they risk becoming seen as anachronisms in today's hyper-connected... — full story

A force sensor (square at the centre) ensures that robots instantaneously sense collisions. The sensor is attached to a steel plate and can be screwed onto the outer joint of the robot arm, (c) Fraunhofer ISITSensitive robots

— 6 April 2009

Robots are commonplace in production halls, but are only allowed to operate in protected areas so as not to endanger humans with their movements. A new cost-efficient, robust force... — full story

Researchers at Rensselaer Polytechnic Institute have discovered a new technique for provoking unusual crazing behaviour in epoxy composites. The crazing, which causes the composite to deform into a network of nanoscale pillar-like fibres that bridge together both sides of a crack and slow its growth, could lead to tougher, more durable components for aircraft and automobiles, (c) Rensselaer/KoratkarFitter frames: Nanotubes boost structural integrity of composites

— 27 March 2009

A new research discovery at Rensselaer Polytechnic Institute could lead to tougher, more durable composite frames for aircraft, watercraft, and automobiles. Epoxy composites are increasingly... — full story

Silicon pyramid structures etched for two minutes using hydrogen fluoride/hydrogen peroxide/water solution. Resulting structure has roughness at the micro and nanometre scales, (c) C. P. Wong3-D surface treatment boosts solar cell efficiency

— 25 March 2009

Using two different types of chemical etching to create features at both the micron and nanometre size scales, researchers at the Georgia Institute of Technology have developed a surface... — full story


Popular tags in Technology: graphene · laser · nanotubes · semiconductor